Repair your bricked Samsung Galaxy S2 I9100G

Posted by on

the exclamation of death !

So have you excitedly tried flashing your new Samsung Galaxy S2 you brought yesterday ? why yes !
did you almost brick it ? why yes !

Yay! This morning figured out what was missing in updating my I9100G. 

The secret to the sauce: The correct PIT file should have been included, and "re-partition" option is ticked and the correct PIT file for I9100G is as attached.


Odin progress 
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
I9100GXWKJ2_I9100GODDKJ2_I9100GDDKI1_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin v.3 engine (ID:15)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Get PIT for mapping..
Firmware update start..
cache.img
NAND Write Start!! 
factoryfs.img
MLO
modem.bin
param.lfs
Sbl.bin
zImage
RQT_CLOSE !!
RES OK !!
Completed..
All threads completed. (succeed 1 / failed 0)
Removed!!
Added!!
Removed!!



Comments

  1. AnonymousFebruary 23, 2012 at 12:26 AM

    mine stay block at setup connection, can u help ?

    ReplyDelete
  2. AnonymousMarch 22, 2012 at 11:13 PM

    what shoudl i do after this step? i get an pack with an arrow and an android character beside it, what does that mean? should i wait?

    ReplyDelete
  3. XLAWSApril 7, 2012 at 2:23 PM

    can you upload back the download file?

    ReplyDelete
  4. SanApril 8, 2012 at 8:33 PM

    its updated ! :)

    ReplyDelete
  5. AnonymousApril 21, 2012 at 3:39 AM

    el metodo es la solucion para bricked ? primero hay que usar el metodo USB JIG ?
    Yo no hablo ingles ! lo siento

    ReplyDelete
  6. SanApril 22, 2012 at 9:24 AM

    la plantilla de USB no es necesario, este método funciona muy bien.

    ReplyDelete
  7. edmondonteApril 22, 2012 at 9:07 PM

    Yo thanks so much for this post, thought my mates phone was gone but its back to life. worked 100%

    1

    ReplyDelete
  8. AnonymousMay 23, 2012 at 3:52 AM

    Hey man, i don't even know what to say, THANK YOU SO MUCH.
    You just saved my phone.

    It was bricked for 2 days, i wasted my time with the other junk (oneclick unbrick, etc..) and was useless, while i just needed ODIN, 5 minutes a few files. :D

    Amazing, THANK YOU SO MUCH.

    I was stuck on the exclamation screen with the comp and phone (same as the pic above this post), and when i saw that blue bar starting to fill up after launching ODIN, i almost exploded in tears of joy.

    Again, THANKS A BUNCH, THANK YOU.

    ReplyDelete
  9. SanMay 24, 2012 at 5:19 AM

    you are most welcome ! have fun !

    ReplyDelete
  10. AnonymousJune 2, 2012 at 10:45 AM

    Hi, I have the same problem and in my case Odin does not recognize te phone. Is there anything else I can do?
    Thanks in advance.

    ReplyDelete
  11. AnonymousJune 2, 2012 at 11:43 AM

    Hi again, I placed the comment above.
    It's all working fine now.
    I had to restart my computer and place the usb cable in a different port.

    You are a life saver and yes, I did burst into tears.

    THANK YOU
    THANK YOU
    THANK YOU

    ReplyDelete
  12. danJune 7, 2012 at 1:55 PM

    hey guys do you have to put the phone into download mode before connecting to your computer to odin

    ReplyDelete
    Replies
    1. AnonymousJune 15, 2012 at 7:01 PM

      No, connect as such and it will be deteced

      Delete
  13. UnknownJune 8, 2012 at 1:36 AM

    thanks you so much your help

    ReplyDelete
  14. AnonymousJune 15, 2012 at 7:00 PM

    You saved my life !
    John Balbosteel

    ReplyDelete
  15. ശ്രീJune 15, 2012 at 10:05 PM

    i dnt get the actual way for this process.... plz help me ma frndzzzzz.. plzzzzzzz

    ReplyDelete
  16. ValethJune 20, 2012 at 12:20 AM

    Only log here to say REALLY THANKS. You save my life. ;) Really thanks. Greeting from Venezuela.

    Success Life
    God bless to All
    RoQue

    ReplyDelete
  17. AnonymousJuly 24, 2012 at 2:45 AM

    THANK YOU
    THANK YOU
    THANK YOU
    THANK YOU
    THANK YOU
    THANK YOU
    THANK YOUUUUUUUUUUUUUUUUUUU!!!!!!!!!!!!!!!!!i was just thinking to buy the jig, you are my savior!!

    Luca from italy

    ReplyDelete
  18. AnonymousJuly 26, 2012 at 5:10 PM

    THANK YOU VERY MUCH!
    Was trying to update the firmware for my friend's S2.
    Didn't realize his was a S2 I9100G. Totally bricked it.
    Now it is back to normal.
    Thank you again.

    ReplyDelete
  19. UnknownJuly 27, 2012 at 4:21 AM

    Hello, i have the same problem, anyone here can tell me id there is any extra step to do this? Thank u!

    ReplyDelete
  20. AnonymousAugust 12, 2012 at 4:40 PM

    OMG.. you just saved my phone..
    THANK YOU SO MUCHIIIIEEEE

    michi

    ReplyDelete
  21. UnknownSeptember 16, 2012 at 1:34 PM

    how to select the correct download from the list ? please help sir

    ReplyDelete
  22. AnonymousSeptember 16, 2012 at 2:19 PM

    sir whenever i connect my phone to the computer the phones starts restarting again and again , odin show me the yellow sign but the phone gets restart and it get removed :( what to do sir please help

    ReplyDelete
  23. UlosBAtikSeptember 18, 2012 at 1:22 PM

    how to repair SGS2 GT-i9100G, I9100GJPKK1_I9100GOJPKK2???
    pliz replay

    ReplyDelete
  24. GeoffersSeptember 26, 2012 at 9:34 AM

    Thanks mate. All the "techies" say don't touch the PIT. Your method worked a treat though. Thanks again.

    ReplyDelete
  25. AnonymousOctober 25, 2012 at 7:07 PM

    is dis indian rom?

    ReplyDelete
  26. UnknownNovember 11, 2012 at 7:50 AM

    My samsung s2 i9100g is stuck with the cell + triangle + pc icon. It all started when i tried to update to ICS via KIES which was a horrible experience it never worked and i had unplugged the usb because KIES was stuck at 0% while installing data after that im stuck with this screen i have tried ODIN downloaded the files you have shared to re-boot but i just won't work ODIN stop's at "Cache.IMG" please help me out im helpless here :(

    ReplyDelete
  27. richoethNovember 16, 2012 at 6:14 PM

    Thanks so much it works perfect

    ReplyDelete
  28. mosecDecember 3, 2012 at 8:18 AM

    Thanks a lot.............
    Thank u very much
    Thank u very much
    Thank u very much
    Thank u very much

    ReplyDelete
  29. AnonymousJanuary 13, 2013 at 1:42 AM

    OMG it acutely worked !
    Thank u very much
    Thank u very much
    Thank u very much
    Thank u very much
    Thank u very much

    Thank u you save my life .....

    ReplyDelete
  30. SateenaMarch 5, 2013 at 9:51 PM

    a great thanks ...... u really helped me

    ReplyDelete
  31. aravindh_feb26March 15, 2013 at 8:33 PM

    thanks man.. gud wrk..

    ReplyDelete
  32. UnknownMarch 17, 2013 at 4:35 PM

    Don't know how to Thanks.. Finally the S2 which was dead for almost a month now is alive.. Tried almost everthing, nothing worked.. This saved my life as my wife was about to kill me for her phone :)

    ReplyDelete
  33. UnknownApril 26, 2013 at 1:05 PM

    y samsung s2 i9100g is stuck with the cell + triangle + pc icon. It all started when i tried to update to ICS via KIES which was a horrible experience it never worked .

    ReplyDelete
  34. AliasjakeMay 9, 2013 at 10:34 PM

    Hi, Thx... It works perfectly! :D:D

    ReplyDelete
  35. UnknownJune 12, 2013 at 2:56 AM

    thanks mate its working.

    the secret is the correct i9100g pits file

    and here is a link to download: http://dl.dropbox.com/u/74074965/omap4_all_20110627_emmc_from_GuruHT.pit

    ReplyDelete
    Replies
    1. UnknownAugust 4, 2013 at 12:18 PM

      After doing this I got msg PASS on my Samsung S2 I9100G. But after that no power Up. what is solution? Pls help !!!!

      Delete
    2. UnknownAugust 27, 2013 at 12:18 AM

      i get the same problem also .... no power up ... ==

      Delete
    3. RahulAugust 29, 2013 at 1:22 PM

      but in download there r 4 part file which file should i download for repair bricked my mobile

      Delete
    4. RahulAugust 29, 2013 at 3:44 PM

      thanks a lot ...........
      thank you very much
      thank you very much
      thank you very much
      thank you very much
      thank you very much

      Delete
  36. BiggsNovember 10, 2013 at 7:55 PM

    " THANKS A LOT BUDDY !!!! IT WORKED PERFECTLY.... I WAS OUT OF MY MIND...SEARCHED AND DOWNLOADED LOTS OF STUFF...TO NO USE ..MY PHONE REFUSED TO CO-OPERATE..
    THANKS AGAIN...

    ReplyDelete
  37. ThuraiNovember 30, 2013 at 12:08 AM

    hi friends,

    my samsung galaxy S2 (GT-I9100G) dead..how to solve this issue.
    please guide me.

    looking forward for your reply.

    regards,
    jay

    ReplyDelete
  38. UnknownDecember 20, 2013 at 6:29 AM

    hei my s2 i9100g is stucked when i root the phone with i9100 soft and i realize and changed to i9500g soft but still i cannot open the phone it not reboot also and when i reboot myself it comes the boot screen and go back to recover mode can u help??????????

    ReplyDelete
  39. UnknownDecember 20, 2013 at 6:32 AM

    hei my s2 i9100g is stucked when i root the phone with i9100 soft and i realize and changed to i9500g soft but still i cannot open the phone it not reboot also and when i reboot myself it comes the boot screen and go back to recover mode can u help??????????

    ReplyDelete
  40. UnknownDecember 28, 2013 at 5:58 PM

    Added!!
    Enter CS for MD5..
    Check MD5.. Do not unplug the cable..
    Please wait..
    I9100GXWKJ2_I9100GODDKJ2_I9100GDDKI1_HOME.tar.md5 is valid.
    Checking MD5 finished Sucessfully..
    Leave CS..
    Odin v.3 engine (ID:4)..
    File analysis..
    SetupConnection..
    Initialzation..
    Set PIT file..
    DO NOT TURN OFF TARGET!!
    Get PIT for mapping..
    Firmware update start..
    cache.img
    NAND Write Start!!
    factoryfs.img
    MLO

    Complete(Write) operation failed.
    All threads completed. (succeed 0 / failed 1)
    any help ????? :(

    ReplyDelete
  41. UnknownJanuary 5, 2014 at 9:55 AM

    heroooo

    ReplyDelete
  42. UnknownJanuary 7, 2014 at 4:54 AM

    Thanks a lot

    ReplyDelete
  43. UnknownJanuary 7, 2014 at 1:18 PM

    thank you from Morocco -Casablanca
    1 - start Odin and plug the USB cable
    2 - check re-partition and auto reboot and F.reset Time
    3 - select pit file : for my case : i9100g_16GB_omap4_all_20110627_emmc-stock.pit
    4 - select .tar.md5 file : for my case i use this to put my SG2 back in life untill i find one for Morocco : I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOME.tar.md5
    5 - click Start
    6 - enjoy :)

    Added!!
    Enter CS for MD5..
    Check MD5.. Do not unplug the cable..
    Please wait..
    I9100GXXLSR_I9100GXXLSP_I9100GXEFLSR_HOME.tar.md5 is valid.
    Checking MD5 finished Sucessfully..
    Leave CS..
    Odin v.3 engine (ID:18)..
    File analysis..
    SetupConnection..
    Initialzation..
    Set PIT file..
    DO NOT TURN OFF TARGET!!
    Get PIT for mapping..
    Firmware update start..
    cache.img
    NAND Write Start!!
    factoryfs.img
    hidden.img
    MLO
    modem.bin
    param.lfs
    Sbl.bin
    zImage
    RQT_CLOSE !!
    RES OK !!
    Removed!!
    Remain Port .... 0
    All threads completed. (succeed 1 / failed 0)

    ReplyDelete
  44. UnknownFebruary 28, 2014 at 1:15 AM

    always failed please help
    Please wait..
    I9100GXWKJ2_I9100GODDKJ2_I9100GDDKI1_HOME.tar.md5 is valid.
    Checking MD5 finished Sucessfully..
    Leave CS..
    Odin v.3 engine (ID:5)..
    File analysis..
    SetupConnection..
    Initialzation..
    Set PIT file..
    DO NOT TURN OFF TARGET!!
    Get PIT for mapping..
    Firmware update start..
    cache.img
    NAND Write Start!!
    factoryfs.img

    Complete(Write) operation failed.
    All threads completed. (succeed 0 / failed 1)
    Removed!!

    ReplyDelete
  45. UnknownMarch 28, 2014 at 10:42 AM

    i cant proceed to download mode, everytime i press the combination buttons the logo of death still appear.. any1 can help?

    ReplyDelete
  46. UnknownMay 8, 2014 at 4:52 PM

    My phone is not detecting on odin....\

    ReplyDelete
  47. UnknownMay 10, 2014 at 5:31 PM

    thanks million man........addtional info at 1st boot i can't click anything... i do the clear cache and factory reset then boot again it work fine. my question is can i change the .md5 into a custom .md5 so i can get a custom rom interface

    ReplyDelete
  48. UnknownDecember 14, 2014 at 4:17 AM

    thank u man thank u very much

    ReplyDelete
  49. UnknownAugust 8, 2016 at 1:32 PM

    LİNK HAS BROKEN PLEASE GİVE ME RİGHT ONE !!

    ReplyDelete

Post a Comment