Another day, another leaked firmware for the Galaxy S2 I9100. XXLP6 is the latest Android 4.0.3 Ice Cream Sandwich firmware leaked for the I9100. Keep in mind though that this is still an unofficial release, so bugs are to be expected. Here’s the unofficial XXLP6 changelog:
Interface: Some new apps ” Google+ – Messenger – ”
Faster: Phone is faster.
Touch: Same as on LP2.
Task: Task manager is present
Read on to find out how to flash this firmware on your Galaxy S2.
The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to you or your device, we won’t be held liable — you only will be responsible, you’ve been warned!!!
This rom and the guide below is compatible only and only with Galaxy S2, model number i9100. It’s not compatible with any other device. Check your device’s model number inSettings » About phone.
This procedure will wipe all your apps, data and settings (but it will NOT touch your SD cards, so don’t worry about those). Backup your Apps and important data — bookmarks, contacts, SMS, APNs (internet settings), etc. This Android backup guide would help you.
If you have Samsung’s PC software Kies installed, un-install it first because it may interrupt the flashing process.
Extract the downloaded file ‘I9100XXLP6_I9100OXXLP3_OXX.rar’ to get these 3 files:
Disconnect your phone if it’s connected to PC. Switch Off your phone. Wait for vibration to confirm complete switch off.
Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume Down + Home + Power. On next screen, press Volume Up to continue to download mode.
Open Odin (from step 2) — double-click the Odin3 v1.83.exe.
Connect your phone to PC now. You should get the message “Added! !” under the Odin’s message box in the bottom left. If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed. See point 3 above under ‘pre-installation tips’.
Select these files in Odin at respective tabs:
Click the PDA Tab, and select I9100_CODE_I9100XXLP6_CL72050_REV02_user_low_ship. tar (from step 3.2)
Click the Phone Tab, and select MODEM_I9100XXLP6_REV_02_CL1097526.tar (from step 3.3)
Click the CSC Tab, and select GT-I9100-MULTI-CSC-OXXLP3_RST.tar (from step 3.1)
Important! On Odin, make sure Auto Reboot and F. Reset Time checkboxes are selected. Do not touch any other check box or tab or anything, except as was required in step 8 above.
Double check everything said in step 8 and 9 above. Your ODIN screen should look similar to this after selecting the required files.
Now, hit the START button to start flashing XXLP6 on your Galaxy S2. When the flashing procedure is finished, your phone will automatically reboot — and when you see the Samsung logo, you can safely unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin. In case it says FAILS (with red background) or nothing seems to be happening, check the Important Note below after step 12 to know what to do.
When it has restarted, your Galaxy S2 will be running Ice Cream Sandwich (ICS) with version being Android 4.0.3, build being XXLP6 and Samsung’s custom UI TouchWiz 4 atop it. Check out your Galaxy S2’s android version here: Settings » About Phone. That’s it, you should have XXLP6 Android 4.0.3 running on your Galaxy S2. Share your comments and queries in the comments section below, and we’ll do our best to help you out! Thanks!